Friday, December 14, 2018
   
Text Size

Pre Owned

2018 CRG FS4 Briggs & Stratton LO 206 4 cycle

 
2018 CRG FS4 Briggs & Stratton LO 206
Chassis Type: 2018 CRG FS4 / 4 Cycle Specific Kart
Engine: Briggs & Stratton LO 206 blueprinted by Fleming
Data: MyChron data comes with this kart!
Engine Applications: The 2018 CRG FS4 is designed specifically for the 4 Cycle Engine packages! 4 Cycle Chassis often need to have room to fit the belt or chain drive between the engine and the seat strut area. The FS4 was designed for the challenges sometimes found trying to fit a 4-cycle engine onto a 2-cycle chassis.
Axle Size: 50mm
Brakes: CRG 4 cyce Steel disc brake system.
Wheels: Magnesium black anodized
Special Features: CRG gives 4 cycle drivers a kart chassis built specifically for them! 
Price: $3,895 OBO and you are on track with this 4 cycle kart!

Updated 09.01.18

Read more: 2018 CRG FS4 Briggs & Stratton LO 206 4 cycle

   

2017 CRG KT2- Single Speed/TaG-Iame X30-Vortex

 
Chassis Type: 2017 CRG KT-2-07.18.18 SOLD! Sorry, this kart has found a new owner!
Ages 15 years and older

Chassis: This kart has approximately one season from new. 30mm tube chassis.

Engine: This kart is currently a 'roller' (being sold without engine), so either add your own engine/radiator package or you can purchase one from us! Vortex, IAME, Briggs & Stratton, we most all of them!

Seat: Remember, when you buy a new or used kart, the seat has to fit you! Kart seats start with Kid XS and range all the way to Adult XXXL. So don't be caught out. All Kartspeed Motorsports come with fiberglass seats sized to fit as long as you are between size kid XS and Adult Large! Want a custom seat? We are a dealer for CRG, Tillet, IMAF and KG Racing Seats.

Steering Wheel: Flat top and bottom black and orange CRG Steering Wheel.

Axle Size: CRG black oxide 50mm rear axle

Brakes: Factory brake system by CRG. 

Wheels: CRG Factory Magnesium

Bodywork: NA2 in black with Factory CRG Sticker Kit

Special Features: Money saver. Get almost new, without the new sticker price! Retail price on a 2018 KT-2roller like this kart is $4,920.00. So when you buy a low, low time kart like this, you save quite a bit.

Price: $2,595.00 OBO 

 
Posted 07.16.18

2017 CRG KT-2
Save money on this 2017 KT2 and go faster in 2018! This adult chassis is designed for the single speed (no shifter) classes often referred to as TaG then broken down in to two age groupings, Senior for those 16yrs old through mid 30's and then Master for the older drivers. Typical engines are the 125cc engines consisting of brands such as Vortex ROK GP, Iame X-30, Rotax Senior Max, KA100 and IAME Leopard. Have us finish this kart with the engine of your choice or have us ship it out so you can add your own engine package.


*As long as we have a pre-owned seat available in your size (we currently have seats for people 50 through 195lbs!), there is no charge for the seat or installation. We do carry brand new seats in sizes all the way up to XXL for drivers weighing up to 260+ lbs.
Here at Kartspeed we custom build all our karts to meet the customers requirements. Are you a shifter driver, TaG, Clone, or just want something to drive but have no idea where to start? Give us a call!

*We ship karts both Nationally and Internationally. Call us for a shipping quote. Are shipping rates are some of the lowest available due to the high volume of new and used karts we deliver to all parts of the world. Checkout the shipping details by clicking on the button on the home page.



   

2016 CRG KT2 TaG Vortex, Iame, Rotax

 
Chassis Type: 2016 CRG KT-2
Ages 15 years and older

Chassis Type: 2016 CRG KT-2. 30mm tube chassis.
Chassis: This kart has almost two years of track time.
Engine: This kart is currently a 'roller' (being sold without engine), so either add your own engine/radiator package or you can purchase one from us! Vortex, IAME, Briggs & Stratton, we most all of them!
Seat: Remember, when you buy a new or used kart, the seat has to fit you! Kart seats start with Kid XS and range all the way to Adult XXXL. So, don't be caught out. All Kartspeed Motorsports come with fiberglass seats sized to fit as long as you are between size kid XS and Adult Large! Want a custom seat? We are a dealer for CRG, Tillet, IMAF and KG Racing Seats.
Steering Wheel: Flat top and bottom black and orange CRG Steering Wheel.
Axle Size: CRG black oxide 50mm rear axle
Brakes: Factory brake system by CRG. 
Wheels: CRG Factory Magnesium
Bodywork: NA 2 black plastic with the new matte finish CRG graphics!
Special Features: Big Money saver. Retail price on a 2018 KT-2 roller like this kart is $4,795.00, Has a new sticker kit so it looks new!
Price: $1,895.00 OBO
 
Updated 09.01.18

2016 CRG KT-2
If you really want to get on track, but the money is holding you back, this could be your kart. You know that buying an old kart is going to lead to trouble, both in performance and repairs, but you still don't have enough for that new, or almost new kart. That is where karts like this one make sense. More time on the chassis means a bit less pretty, but it will still do the job and get you out on track. Plus you won't break the bank in the process.  All these reasons are why a kart like this makes a lot of sense. Its been used, but still has all the current CRG bits and pieces, just not the price. This adult chassis is designed for the single speed (no shifter) classes often referred to as TaG then broken down in to two age groupings, Senior for those 16yrs old through mid 30's and then Master for the older drivers. Typical engines are the 125cc engines consisting of brands such as Vortex ROK GP, Iame X-30, Rotax Senior Max, KA100 and IAME Leopard. Have us finish this kart with the engine of your choice or have us ship it out so you can add your own engine package.

Kart was currently raced with a Vortex ROK GP and that is the engine parts and radtiator featured in the photos.These are not included in the sale price of the kart.

*As long as we have a pre-owned seat available in your size (we currently have seats for people 50 through 195lbs!), there is no charge for the seat or installation. We do carry brand new seats in sizes all the way up to XXL for drivers weighing up to 260+ lbs.
Here at Kartspeed we custom build all our karts to meet the customers requirements. Are you a shifter driver, TaG, Clone, or just want something to drive but have no idea where to start? Give us a call!

*We ship karts both Nationally and Internationally. Call us for a shipping quote. Are shipping rates are some of the lowest available due to the high volume of new and used karts we deliver to all parts of the world. Checkout the shipping details by clicking on the button on the home page.



   

2017 CRG KT2- Single Speed/TaG

 
Chassis Type: 2017 CRG KT-2- One race from new!-SOLD! Sorry this kart is no longer available. If you are looking for a nice late model sprint racing kart like this one, contact us for current inventory. 925-372-7420 or This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Ages 15 years and older

Chassis: This kart has only 2 hrs of track time!

Engine: This kart is currently a 'roller' (being sold without engine), so either add your own engine/radiator package or you can purchase one from us! Vortex, IAME, Briggs & Stratton, we most all of them!

Seat: Remember, when you buy a new or used kart, the seat has to fit you! Kart seats start with Kid XS and range all the way to Adult XXXL. So don't be caught out. All Kartspeed Motorsports come with fiberglass seats sized to fit as long as you are between size kid XS and Adult Large! Want a custom seat? We are a dealer for CRG, Tillet, IMAF and KG Racing Seats.

Steering Wheel: Flat top and bottom black and orange CRG Steering Wheel.

Axle Size: CRG black oxide 50mm rear axle

Brakes: Factory brake system by CRG. 

Wheels: CRG Factory Magnesium

Bodywork: NA2 in black with factory CRG Sticker Kit.

Special Features: Money saver. Get almost new, without the new sticker price! Retail price on a 2018 KT-2roller like this kart is $4,795.00. So when you buy a low, low time kart like this, you save quite a bit.

Price: $2,995.00 OBO 

 
Updated 09.01.18

2017 CRG KT-2
Are you a fast local driver on a budget? Do you want a new kart, but the cost of brand new is holding you back? Are you the driver looking to move up a few places on the grid but a wise spender with the bank account? All these reasons are more are why a kart like this makes a lot of sense. Not brand new, but still has all the current CRG bits and pieces, just not the price.Save money on the low time 2017 and go faster in 2018! This adult chassis is designed for the single speed (no shifter) classes often referred to as TaG then broken down in to two age groupings, Senior for those 16yrs old through mid 30's and then Master for the older drivers. Typical engines are the 125cc engines consisting of brands such as Vortex ROK GP, Iame X-30, Rotax Senior Max, KA100 and IAME Leopard. Have us finish this kart with the engine of your choice or have us ship it out so you can add your own engine package.

Kart was currently raced with a Vortex ROK GP and that is the engine featured in the photos.

*As long as we have a pre-owned seat available in your size (we currently have seats for people 50 through 195lbs!), there is no charge for the seat or installation. We do carry brand new seats in sizes all the way up to XXL for drivers weighing up to 260+ lbs.
Here at Kartspeed we custom build all our karts to meet the customers requirements. Are you a shifter driver, TaG, Clone, or just want something to drive but have no idea where to start? Give us a call!

*We ship karts both Nationally and Internationally. Call us for a shipping quote. Are shipping rates are some of the lowest available due to the high volume of new and used karts we deliver to all parts of the world. Checkout the shipping details by clicking on the button on the home page.



   

Maxter KZ 125 Shifter Engine

 
Engine Type: Maxter KZ 125 Shifter Engine Package 

Details:  Maxter KZ Engine Package. This is a 125cc, two stroke, water cooled dry clutch Italian engine developing over 48hp. This engine package comes complete with engine mount, ignition, carb, pipe and silencer. Add this engine to your kart or to one of our shifter roller chassis and have a blast! These are National Level engines with all the internal goodies. Replacement cost for this engine is over $8,500.00. 
Special Features: This 2015 Maxter was factory blueprinted and has a brand new top end (piston, ring, clips, bearing). Bottom end has approximately 5 hrs. 
You can save thousands over the cost of new. Out of the box, these KZ engines cost over $5,900. But wait, you are not finished. To be competitve, you then you take them to the engine builder to do the blueprinting, cylinder work and of course the standard engine builder 'magic!' Several thousand dollars later, you have an engine ready to race. So save the cost of new with this blueprinted KZ. Engine is professional level, capable of maximum horsepower. Maintenance has been impeccable. 
Price: $3,195.00. That saves you over $5,000.00!

Updated 08.08.18

Read more: Maxter KZ 125 Shifter Engine

   

2013 Tony Kart Cadet 1010

 
2013 OTK Tony Kart Cadet
For ages 9-12 years old


Chassis Type: 2013 Tony Kart Cadet/Mini. Wheel base is 1010mm and the tubes are 28mm throughout.
ENGINE: This Tony Kart roller is designed for a variety of engines, so please contact us with specific application questions, to suit your needs. Typically, this size kart chassis will be used in junior one or junior two classes which includes engines such as Rotax Mini Max, Iame Mini Swift, Vortex Mini ROK, TaG Junior two cycle engine packages. Can also be used with 4 cycle engines such as the Briggs & Stratton. Typical ages for this chassis are 9-12years old, but please consult with one of our staff to make sure you purchase the correct size chassis for your son or daughter. 
TaG Engine Packages available: We have brand new Vortex and Iame Swift Junior TaG Engine Packages. We also carry Briggs & Stratton 4 cycle engines.
Chassis Applications: The Tony Mini Class of karts are meant for the junior drivers moving out of kid karts/baby karts and moving into junior class racing, typically ages 9-12yrs old. If you are unsure as to which size chassis you require, please contact us for clarification on engine, class, size and weight.
Seat: Fit to size of new owner.
Bodywork: OTK M4 bodywork
Axle Size: 
OTK 30mm racing axle comes standard.
Brakes: OTK Factory hydraulic brake system

Wheels: Comes with OTK AXP-Q Aluminum Wheels.
Special Features: Inexpensive way into cadet kart racing.
PRICE: $850.00
Price:  If your prefer brand new,  a 2018 Tony Kart Cadet lists for $3,295 brand new, (un-assembled). Kartspeed Motorsports is here to put you in an OTK Kart, so call us to find the best pricing available on this awesome sprint racing machines! (2017 prices yet to be confirmed)

Updated 08.08.18


Read more: 2013 Tony Kart Cadet 1010

   

2018 Aluminos Mini Cadet Roller

 
2018 Aluminos Mini (Cadet)- Only ONE race on this chassis!
Ages 8-12 years old

Chassis Type: 
2018 Aluminos Mini- 28mm tubes 950mm wheelbase- One race from new!

A
pplications: The Aluminos Mini chassis is a 28mm tube chassis designed for kids ages 8-12 years old. 
Engine: We can fit this kart with your engine of choice or puchase as is to fit your existing engine package
Bodywork: Mini bodywork in black with factory Aluminos Graphics-Nose will receive an Aluminos Graphic too!
Brake System: Mini Aluminos Brake System.
Axle: 40mm Aluminos rear axle
Wheels: Magnesium Wheels
Seat: Kartspeed Motorsports used Karts come with fiberglass racing seats to fit the new owner. Want a custom seat? Just let us know!

Special Features: Adjustable front Spindles, adjustable ride height, Sniper front end geometry allows for separate castor and camber positioning, suede steering wheel & Aluminos graphics.

Price: $2,195 OBO 

Posted 08.08.18

Read more: 2018 Aluminos Mini Cadet Roller

   

2018 Aluminos Mini Iame Mini Swift Woltjer Blueprint

 
2018 Aluminos Mini (Cadet)- Only ONE race on this kart!
Ages 8-12 years old

Chassis Type: 
2018 Aluminos Mini- 28mm tubes 950mm wheelbase

A
pplications: The Aluminos Mini chassis is a 28mm tube chassis designed for kids ages 8-12 years old. 
Engine: IAME Mini Swift blue printed by Woltjer- Only one race from new!
Bodywork: Mini bodywork in black with factory Aluminos Graphics
Brake System: Mini Aluminos Brake System.
Axle: 40mm Aluminos rear axle
Wheels: Magnesium Aluminos Wheels
Seat: Kartspeed Motorsports used Karts come with fiberglass racing seats to fit the new owner. Want a custom seat? We are a Dealer for Tillet, IMAF and KG Racing Seats. We have un-padded, 1/4-pad and fully padded versions are available in sizes kid small through XXXL which fits drivers up to 280lbs!!

Special Features: Adjustable front Spindles, adjustable ride height, Sniper front end geometry allows for separate castor and camber positioning, suede steering wheel & Aluminos graphics.

Price: $4,195 OBO 

Posted 08.08.18

Read more: 2018 Aluminos Mini Iame Mini Swift Woltjer Blueprint

   

2017 Aluminos RS1 Stock Moto CR125

 
2017 Aluminos RS1 125 Shifter Kart

Chassis Type: 
2017Aluminos RS1 32mm- only two races from new.

A
pplications: The Aluminos "RS1" chassis is a 32mm tube chassis designed for 125cc shifter racing in the U.S! These chassis are built specifically for your Honda CR125 or KZ 6 speed shifter engine packages. 
Engine: Honda CR125 blueprinted by 
Swedetech and ready to race. 125cc, two stroke, water cooled, 6 speed gearbox. Fresh Top End!
Bodywork: NA 2 in Black with factory Aluminos Graphics
Brake System: VEN05 Ceramic Brakes front and rear.
Axle: 50mm Aluminos rear axle
Wheels: Magnesium Aluminos Wheels
Seat: Kartspeed Motorsports used Karts come with fiberglass racing seats to fit the new owner. Want a custom seat? We are a Dealer for Tillet, IMAF and KG Racing Seats. We have un-padded, 1/4-pad and fully padded versions are available in sizes kid small through XXXL which fits drivers up to 280lbs!!

Special Features: Adjustable front spindles, adjustable ride height, Sniper front end geometry allows for separate castor and camber positioning, extremely sharp looking Aluminos graphics, magnesium heel stop, fully adjustable bump shifter and magnesium components throughout.

Price: $8,495 OBO 

Updated 08.01.18

Read more: 2017 Aluminos RS1 Stock Moto CR125

   

2016 Aluminos 125 Shifter Kart

 
2016 Aluminos RS1 125 Shifter Kart

Chassis Type: 
2016 Aluminos RS1 32mm- One season on this chassis.

A
pplications: The Aluminos"RS1" chassis is a 32mm tube chassis designed for 125cc shifter racing in the U.S! These chassis are built specifically for your Honda CR125 or KZ 6 speed shifter engine packages. 
Engine: Honda CR125 blueprinted and ready to race. 125cc, two stroke, water cooled, 6 speed gearbox. approximately 10hrs one bottom end. Fresh top end.
Bodywork: NA 2 in Black with factory Aluminos Graphics
Brake System: VEN05 Ceramic Brakes front and rear.
Axle: 50mm Aluminos rear axle
Wheels: Magnesium Wheels-black
Seat: Kartspeed Motorsports used Karts come with fiberglass racing seats to fit the new owner. Want a custom seat? We are a Dealer for Tillet, IMAF and KG Racing Seats. We have un-padded, 1/4-pad and fully padded versions are available in sizes kid small through XXXL which fits drivers up to 280lbs!!

Special Features: Front spindles with 3 multiple tie rod adjustment, adjustable ride height, Sniper front end geometry allows for separate castor and camber positioning, extremely sharp looking Aluminos graphics, magnesium heel stop, fully adjustable bump shifter and magnesium components throughout.
Price: $7,195.00 OBO 

Updated 09.01.18

Read more: 2016 Aluminos 125 Shifter Kart

   

Page 2 of 42

Sales Information

Email or call 925-372-7420 if you more photos or details.
Kartspeed Motorsports is located in Northern CA. Shipping is possible anywhere in U.S.

Well sell new and used GP’s so call us with your requirements. We have the best prices on New GPs in the U.S.!

Ask about availability of 125 and 80 shifter engines as well as 125cc TaG engine package